APPLIANCE LOCK : INSURANCE APPROVED INSTALLATION OPTION :  A COMPONENTS INCLUDED : •  Safe plate 1 (Securing Plate) •  Safe plate 2 (Appliance plate) •  Self-tapping screws •  Allen key for security screws (1 per Client) •  Security screws •  Stabilizer feet PROCEDURE 1.  Determine Installation position of appliance lock. 2.  Drill two (2,8mm) holes for the self-tapping screws and two (7mm)      holes for the security screws into the steel base of the Appliance.       Attach safe plate 2 with two self-tapping screws to Appliance, or      use plate 2 as a large washer 3.  Drill four (6mm) holes through the mounting surface.  Attach safe      plate 1 to mounting surface by using Self Tapping Screws, Rawl      Bolts or Bolts and Nuts thru large washers, if onto a wooden shelve      or desk, or onto the floor with Rawl bolts or with Rawl plugs. 4.  Place the two safe plates on top of each other; fasten the two      security screws with washers through the appliance into both the      safe plates and lock with the Allen key. 5.  The top plate can be used as "Large washer" on the inside op the PC,      (upside down if possibly), thus increasing the strength in securing      the unit. 6.  The Appliance base can be stabilized with 1cm thick stabilizer feet. 7.  The Appliance is now firmly secured to the surface. ALL INSTALLATIONS ARE DONE AT OWNERS RISK

CLICK HERE FOR OPTION  B >